studies carried out by cwprs, pune, india
http://cwprs.gov.in current meter rating tank [ go to Youtube.com ]
Time
: 0 min
25
Added
: 19/11/07 09:54
Send with Gmail
Videos
(34)
|
Blog posts
(91)
Flux Drive
Please note: The values shown on the meter in this video are not correct, and it it not (yet) producing overunity.
Instead of moving magnets through coil to produce current, we move the flux in the magnet to produce current [
go to Youtube.com
]
Time
: 3 min
Added
: 17/09/07 13:00
Send with Gmail
Hometown hero adds another win in the 50 meter
In addition to her 200 meter freestyle win, Libby Lenton, the current world record holder for the 50 meter freestyle, gets the win by holding the lead for the entire race. Lenton who came dangerously close to beating her world record in the 200, came close again in the 50. Lenton was a key player in helping out in an Australian sweep. (WCSN, WCSN.com) [
go to Youtube.com
]
Time
: 0 min
50
Added
: 03/12/07 06:59
Send with Gmail
100m Men's World Records. 9.77 sec - Asafa Powell.
Track and Field Video. 100m Men's World Records.
9.77 sec - Asafa Powell. June 14, 2005. Athens.
www.sprintic.com - Track and Field Magazine [
go to Youtube.com
]
Time
: 0 min
55
Added
: 28/12/06 22:48
Send with Gmail
led1
just a quick presentation of my current project - "less than 60W for over 100 square meters - mission impossible?". i'm using standard 5mm, ultra bright, cool white LEDs. sorry for a bit messy appartment, i'll try to clean it up for next video ;). [
go to Youtube.com
]
Time
: 1 min
48
Added
: 10/01/08 04:14
Send with Gmail
Russian VFD-VU meter
I bought a bunch of them at eBay. They all need some work, there is one FET missing. I did not have a KP303B so I used a BF256C. The FET forms a constant current source that defines the 0-point of the vu meter. I think a BF245 would do also ... The spec sheet says that you need 6.3V AC current for heating of the VFD. I used a 5V DC and it works well. Besides the 5V you need +-15V dc regulated for the opamps and the logic chips. The +15V is also used for anode voltage of the VFD tube. [
go to Youtube.com
]
Time
: 0 min
39
Added
: 14/01/08 21:10
Send with Gmail
Simple Electric generator II
This is my first attempt at a simple home made electric generator, made from enamelled wire,multi meter,crocodile clips,neo-dynium magnets and tape. Please tell me what you think [
go to Youtube.com
]
Time
: 0 min
55
Added
: 14/06/07 00:04
Send with Gmail
External view of Woolworth warehouse in Midrand Johannesburg
External view of Woolworths warehouse in Midrand Johannesburg. Current length of building is 750 meters with a further extension planned for 2010 [
go to Youtube.com
]
Time
: 0 min
11
Added
: 07/09/07 13:57
Send with Gmail
Stepper Motor Generator - Various Rectifier Circuits - 1
This is a compilation video. The object was to try 4 different rectifier circuits to see which yielded the most power at maximum sustained running speed of a Jensen 25 engine.
In the end I don't know if the circuit that worked the best in fact IS the best in terms of potential voltage and current. All I know is what made the meter go the highest.
This is part 1, since the video was too big to fit within youtube limits (never thought THAT would happen) [
go to Youtube.com
]
Time
: 6 min
59
Added
: 01/10/07 02:54
Send with Gmail
Hydrogen Tap 1 (Plate Thickness Current Test) # 32
This test is to find out if using a thicker plate will produce more current. The amount of current is directly related to the amount of Hydrogen that will be produced. The test uses 4 stainless plates together for each side of the electrode and then reduces them by 3. The test is being conducted using a 12 volt battery and a digital amp meter. After the first test is completed a thinner plate is used to compare and finely 2 aluminum plates are tested. [
go to Youtube.com
]
Time
: 7 min
35
Added
: 13/12/06 08:34
Send with Gmail
1 -
10
of
34
Videos
Page:
First
| <
Preceding
|
Next
>
0
|
1
|
2
